Aversa Light Blue Mosaic Gloss Wall Tiles 300x300mm

£103.82m² £86.52m²

Bulk Savings

  • £103.52m² £86.27m² for 20m²
  • £103.22m² £86.02m² for 40m²
  • £102.62m² £85.52m² for 60m²+
  • AREA:

You require (m²)

Description / Specification

Product Code MOS193
Free Samples Available Yes
Pack Size 0.99m2
Underfloor Heating Suitable
Size 300x300mm
Thickness No
Colour Blue
Material Glass
Tiles Per Box 11
Finish Gloss
Stock Status In Stock
Usage Wall

Aversa Light Blue Mosaic Gloss Wall Tiles 300x300mm

This tile is made of glass, meaning beautiful and intricate patterns are more possible than with any other material. This allows you to personalise your room - please see our other mosaic tiles for more colours. Like porcelain, they are easy to clean and do not absorb water. Do not be fooled by the word 'glass' - these tiles are much more durable than they sound and have passed the required industry standards!

The Gloss finish on this tile gives a shinier look compared to others finishes. This makes it more reflective which is ideal if you like a lot of light in the room, and an open airy feel. Gloss tiles are perfect for smaller rooms since they help bounce the light around, and also work well around fireplaces or in kitchens since they are so easy to clean. If you live in a busy home and have little time to clean, this makes the tiles even more appealing. It should be noted that these tiles are slippery, so good for bathroom walls due to the condensation

Aqua instantly gives that ocean feel that looks so fitting in any bathroom or lavatory. It is light, airy and refreshing and works well in bright rooms.

These mosaic tiles are separate, arranged to form a single tile. They add character and personality to an otherwise plain area, and can be used to frame an area such as around a mirror in a bathroom. Mosaic tiles are reminiscent of Roman and Greek design, and Islamic architecture, which creates a Moroccan or Mediterranean feel. The small mosaic design also makes larger rooms seem more welcoming.

Please try our free samples if you are interested in this product.


Prepare the Surface Area

Any cracks or damaged areas should be repaired and the surface should be level. If a primer has been purchased then the primer should be applied and left to dry. Plan the Layout of the Tiles

Mark the centre of the surface area using snap chalk and plan where each tile will lay. This can be completed by dry laying each tile or simply marking where each tile will be installed. This will allow the edge pieces to be measured and cut accordingly.

Apply Adhesive

It is important to read manufacturer’s instructions if the adhesive requires mixing. The adhesive should be applied with a trowel and only 1 meter squared should be applied at a time. A ¼” coat is usually recommended; however, this may vary depending on the tile. Use the notched side of the trowel at a 45-degree angle to remove any excess adhesive.

Lay the Tiles

If you are laying floor tiles then start in the centre of the room, or if you’re laying wall tiles then start in a corner and work your way across. Place spacers in between tiles to ensure an even joint gap is created. Gently tap all tiles into place and wipe away any excess adhesive from the surface of the tiles using a damp sponge. Always check the lines are even using a spirit level. Leave to dry for 24 hours.

Apply Grout

Use a grout flout to push the grout into the joints at a 45-degree angle using diagonal swipes. Ensure any excess grout is removed from the surface of the tiles to avoid damaging the final appearance. The grout should take around 20 minutes to cure. Once the grout has cured, wipe down all tiles with a damp cloth. Once the tiles have been left for 72 hours then you are able to apply a coat of sealant over the tiles or grout.

Always read the manufacturer’s instructions on packaging as aspects of the installation method may change due to variation of products.


UK Delivery

UK Delivery

Here at Tile Monkey we have two main delivery options. Our economy delivery will arrive to you within 2-3 standard working days, alternatively, we offer a next day delivery service for orders placed before 12pm for guaranteed delivery the day after purchase.

All of our deliveries are made between 9am and 6pm, however, there is a small surcharge of £30 if you require a timed delivery. We instruct all of our delivery drivers to call our customers approximately one hour prior to delivery so you don't have to wait around all day for your new tiles to arrive!

Delivery Van


Rate this product



All of our samples are completely free and sent to
you via First Class Royal Mail delivery!

learn more

Calculate Packs Needed

  • x
    • metres
    • feet
  • Total area:
  • Packs needed:
  • Which cover the area of:
  • Total:
  • £