X

Corus White Porcelain Satin Wall Tiles 100x200mm

£18.92m² £15.77m²

Bulk Savings

  • £18.62m² £15.52m² for 20m²
  • £18.32m² £15.27m² for 40m²
  • £17.72m² £14.77m² for 60m²+
  • AREA:

You require (m²)

Description / Specification

Product Code POR2341
Free Samples Available Yes
Pack Size 1.00m2
Underfloor Heating Suitable
Size 100x200mm
Thickness 6.5mm
Colour White
Material Porcelain
Tiles Per Box 50
Finish Satin
Stock Status In Stock
Usage Wall

Corus White Porcelain Satin Wall Tiles 100x200mm

This tile is a larger version of the POR2336

This tile is a porcelain material, which means it is stain and water resistant; perfect for a messy kitchen or bathroom with condensation. It is also more durable and longer lasting than ceramic.

Satin finished tiles lay somewhere between matt and gloss. They have a smooth surface with a subtly reflective sheen, but not to the extent of gloss. The smoothness also makes them easier to clean than matt, but safer than gloss by not being as slippery. This makes them perfect for homes with children or pets where mess is made but safety needs to be considered.

Being white means the tiles are modern looking, suitable for monochrome themes, and create a light and airy feel that works well in rooms with natural light. They are versatile enough to suit any existing colour scheme, but show up dirt more easily. However, as tiles are easy to wipe clean, this disadvantage is limited.

Please try our free samples if you are interested in this product.

Installation

Prepare the Surface Area

Any cracks or damaged areas should be repaired and the surface should be level. If a primer has been purchased then the primer should be applied and left to dry. Plan the Layout of the Tiles

Mark the centre of the surface area using snap chalk and plan where each tile will lay. This can be completed by dry laying each tile or simply marking where each tile will be installed. This will allow the edge pieces to be measured and cut accordingly.

Apply Adhesive

It is important to read manufacturer’s instructions if the adhesive requires mixing. The adhesive should be applied with a trowel and only 1 meter squared should be applied at a time. A ¼” coat is usually recommended; however, this may vary depending on the tile. Use the notched side of the trowel at a 45-degree angle to remove any excess adhesive.

Lay the Tiles

If you are laying floor tiles then start in the centre of the room, or if you’re laying wall tiles then start in a corner and work your way across. Place spacers in between tiles to ensure an even joint gap is created. Gently tap all tiles into place and wipe away any excess adhesive from the surface of the tiles using a damp sponge. Always check the lines are even using a spirit level. Leave to dry for 24 hours.

Apply Grout

Use a grout flout to push the grout into the joints at a 45-degree angle using diagonal swipes. Ensure any excess grout is removed from the surface of the tiles to avoid damaging the final appearance. The grout should take around 20 minutes to cure. Once the grout has cured, wipe down all tiles with a damp cloth. Once the tiles have been left for 72 hours then you are able to apply a coat of sealant over the tiles or grout.

Always read the manufacturer’s instructions on packaging as aspects of the installation method may change due to variation of products.

Delivery

UK Delivery

UK Delivery

Here at Tile Monkey we have two main delivery options. Our economy delivery will arrive to you within 2-3 standard working days, alternatively, we offer a next day delivery service for orders placed before 12pm for guaranteed delivery the day after purchase.

All of our deliveries are made between 9am and 6pm, however, there is a small surcharge of £30 if you require a timed delivery. We instruct all of our delivery drivers to call our customers approximately one hour prior to delivery so you don't have to wait around all day for your new tiles to arrive!

Delivery Van

Reviews

Rate this product

Rating

NOT SURE WHAT TO CHOOSE?

All of our samples are completely free and sent to
you via First Class Royal Mail delivery!

learn more

Calculate Packs Needed

  • x
    • metres
    • feet
  • Total area:
  • Packs needed:
  • Which cover the area of:
  • Total:
  • £